LF-2420

Heavy duty all hydraulically powered spreader for spreading: dry chemical fertilizer, AG lime, gypsum, and other free flowing material.

The Warren LF-2420 incorporates a simple hydraulic power system with a heavy gauge steel hopper body for profitable long life operation.

• Hydraulic powered bulk material spreader
• Designed for ease of operation and maintenance
• Elminates troublesome components found in mechanically powered models

Body Construction

• All electrically welded ASTM-A1011 A-45 high tensile steel
• 3/16" sills which have integrally formed full length conveyor chain shield supports
• Sides and ends are inverted "J" formed for hopper strength and stiffness without corrosion pockets
• Sides are set at 45 degrees to provide easy material flow
• 3/16" conveyor bottom panel with rear belt wiper
• "Tapered-in" front and rear end gates for better material seal and reduced power requirement.
• "Bolt-on" 12 gauge skid resistant surface catwalks and formed rod type rope hooks

Conveyor

• Overall Width: 24"
• Conveying Width: 18" with a 12 "x18" maximum feedgate opening
• Pintle type conveyor chain with 7/16" hardened pins and 2 1/4" pitch
• 3/8" x 1 1/4" cross bars are welded to every other link
• Eight tooth steel sprockets mounted to 1 1/2" diameter idler shaft and 2" diameter drive shaft
• 4" chain idler adjustment with anti-friction bearings
• Rear belt type sprocket sealers and "bolt-in" conveyor chain shields.
• Hand crank type feedgate control and flow divider controls

Conveyor Drive

• Heavy duty 6:1 reduction gearbox with 2" diameter drive shaft
• Gearbox housing of aluminum alloy with single "bolt" torque bracket mount for easy cleaning and maintenance
• Low speed high torque hydraulic motor is integrally mounted to conveyor gearbox

Spinner Assembly

• Two 24" diameter dished spinners
• Driven by heavy duty gear type hydraulic motors having 1 1/4" shafts with double tapered roller bearings
• Adjustable spinner speed
• Adjustable material flow divider for spread patter adjustment
• Three specially formed adjustable replaceable fins on each spinner
• Protective spinner guard

• Automatic Ground Speed Coordinated Control for Accurate Fertilizer Application
• #3 Chain Conveyor for Lower Application Rates
• #4 Belt Over Chain Conveyor for Lowest Application Rates
• #6 Stainless Steel Mesh Chain Conveyor w/ S.S. Bottom Panel for "Freeze-Up" Free Operation
• Tarps
• Special Paint
• Stainless Steel Hopper Components