LF-3020

• Hydraulic powered bulk material spreader
• Wide conveyor for economical high capacity performance

Body Construction

• All electrically welded ASTM-A1011 A-45 high tensile steel
• 10 gauge sides continuously welded to sills
• 3/16" sills which have integrally formed full length conveyor chain shield supports
• Sides and ends are inverted "J" formed for hopper strength and stiffness without corrosion pockets
• Full slope 10 gauge side supports at each 1/4" formed hat section type cross sill hold sides at a 45 degree angle
• 3/16" (7 gauge) conveyor bottom panel with rear belt wiper
• "Tapered-in" front and rear end gates for better material seal and reduced power requirement.
• "Bolt-on" 12 gauge skid resistant surface catwalks and formed rod type rope hooks

Conveyor

• Overall Width: 30"
• Conveying Width: 24" with a 12" x 24" maximum feedgate opening
• Pintle type conveyor chain
• 3/8" x 1 1/4" cross bars are welded to every other link
• Eight tooth steel sprockets mounted to 1 1/2" diameter idler shaft and 2" diameter drive shaft
• 4" chain idler adjustment with anti-friction bearings
• Rear belt type sprocket sealers and "bolt-in" conveyor chain shields.
• Hand crank type feedgate control

Conveyor Drive

• Heavy duty 6:1 reduction gearbox with direct mounted orbital type hydraulic motors powered by a heavey duty gear type hydraulic pump driven by the truck PTO
• In Cab electric "off-on" with two-speed selector for high and low conveyor speed

Spinner Assembly

• Two 24" diameter dished spinners
• Spinners have 3 formed fins with adjustable angle
• Adjustable material flow divider for spread patter adjustment
• Heavy Duty Frame
• Protective spinner guard

• Automatic Ground Speed Coordinated Control for Accurate Fertilizer Application
• 60 Degree Side Slopes for Better Material Flow
• #3 Chain Conveyor for Lower Application Rates
• #4 Belt Over Chain Conveyor for Lowest Application Rates
• Tarps
• Special Paint
• Stainless Steel Hopper Components